D3O material has very low compression set properties allowing the material to return to its original form after repeated loading or compression. D3O can also recover from multiple impacts. However in the cases of extreme forces the ability to recover fully may be compromised.
Yes, it is reach compliant.
Orange is the colour of the D3O brand and therefore the majority of D3O products are only available in orange. However, in certain markets or applications where alternative colours are necessary, such as defence or PPE, some products are available in tan colour – please see the relevant Product Data Sheets for more information.
Generally, the physical properties of the D3O material show little or no degradation with exposure to UV light. However, small discolouration of the orange may be observed.
D3O does not absorb water. However, if immersed in water for a prolonged period of time then a small amount of water could be absorbed by the D3O material. However, after the material is removed from immersion the absorbed water will evaporate. Please see the relevant Material Data Sheet for more details.
D3O is not a thermoplastic material and therefore can’t be reshaped by melting.
This test provides an alternative measurement of a material or products hardness to using a durometer. It represents the force required to compress or pinch the material to 50% of its original thickness. A higher value indicates a stiffer or harder material. To provide a better idea on the scale of values, typically a man will be able to pinch a material up to a force of 200N.
D3O does not react with petrol or diesel. Please refer to the relevant Material Data Sheet for more details.
D3O passes the flame resistances standard ISO 11612 (limited flame spread). Please refer to the Material Data Sheet for more details.
The physical properties of each D3O formulation are detailed in the Material Data Sheets.
The typical life expectancy of a D3O material is 2-3 years. This will depend on the conditions the material endures and how it is looked after during use and storage. D3O protectors are designed to withstand multiple impacts however the re-use-ability of the protectors will depend on the severity of the impact. After any significant impact the protectors should be inspected and if necessary returned to D3O for evaluation.
D3O can be co-moulded with other material via different secondary manufacturing steps. Since the pressures and temperatures associated with different secondary processing procedures vary greatly we recommend that each process needs to be assessed on an individual basis.
For CE certified D3O products please follow the washing guidelines issued in the CE booklet user instructions. For other parts please use the following instructions: Due to the wide ranging use of D3O and unique stresses that each application imposes on the D3O components during use, integration etc, it is very difficult to suggest specific washing instructions, appropriate to each and every application. As a general rule we recommend that D3O protectors are removed carefully from the garment and are wipe-clean only. For more details please refer to the D3O Care & Handling Instructions.
D3O is a British based impact protection solutions company that markets a unique patented technology, which is used to produce a shock absorbing material.
D3O manufactures a smart material with high shock absorbing properties. In standard conditions, the molecules flow freely allowing the material to remain soft and flexible, but on impact, they lock together to absorb impact energy and reduce the force transmitted. The molecules instantly return to their flexible state. The material is strain rate sensitive which means the stronger the impact, the more the molecules react, and better the protection.
No. D3O does not go hard when hit, but the molecules lock together to absorb and spread the force, significantly reducing the effect of impact.
D3O develops impact protection solutions for a range of markets from motorcycle to electronics, sports to footwear, as well as the military.
D3O reacts to the unique impact environment e.g. at high speeds it provides a different level of impact to at low speeds. D3O absorbs and dissipates the impact energy which reduces the force transmitted. It’s soft and comfortable to wear under your clothes. It’s less bulky, so more people prefer to wear it. D3O delivers the most flexible, comfortable and discreet protection on the market and it consistently outperforms traditional foam based materials.
D3O’s unique molecular properties means it can remain thin and flexible, while providing optimum protection against impact.
Yes. D3O is the market leader in performance for motorcycle protection and this back protector offers excellent comfort, fit and protection from impact. It is lightweight, comfortable and breathable so you can be protected without feeling it.
Rider safety is our number one priority and D3O tests its materials and components using the highest standard of testing. We run our own in-house tests, which are then verified by independent laboratories, such as SATRA, STR, NPL, INSPEC, HPE, MERL, BSI. All of our products for motorcycle CE certified and we have been the first to market with a range of limb protectors that meet the CE standards being introduced later this year. All of our products are printed with clear markings demonstrating the highest standards of safety.
It has a wide range of applications, including personal protection for various sport disciplines, motorcycling, work wear, and accessories for electronic protection, such as iPhone cases and computers. We have also made a blunt force impact vest for the French Gendarmerie.
D3O has an in-house team of chemists and designers, who customise the material for bespoke protection. We offer full 360 degree solutions for our partners, such as Furygan, from brainstorm, idea generation, CAD concepts, prototyping, testing, sampling to production.